Audio Technica AT-LPW40WN Turntable Manual Belt Drive Wood Base Walnut

Audio Technica AT-LPW40WN Turntable Manual Belt Drive Wood Base in Walnut

The AT-LPW40WN is a fully manual, belt-drive turntable designed to give you optimal high-fidelity audio reproduction from vinyl. It features an aesthetically pleasing anti-resonance MDF (medium density fiberboard) plinth with simulated walnut wood veneer to limit low-frequency acoustical feedback and a sensor-monitored motor to ensure accurate platter rotation speeds at 33-1/3 and 45 RPM.

The turntable includes a straight carbon-fiber tonearm with adjustable tracking force and an AT-HS4 universal ½"-mount headshell with an AT-VM95E Dual Moving Magnet phono cartridge. Audio-Technica has been a leader in phono cartridge design for more than 50 years, and that expertise shows in the versatile, high-performance AT-VM95E cartridge, which comes with a 0.3 x 0.7 mil elliptical stylus, but is also compatible with any VM95 Series replacement stylus, offering a wide choice of options for every budget and application.

The AT-LPW40WN is equipped with a built-in selectable phono preamp and a detachable dual RCA output cable to enable direct connection to components with or without a dedicated phono input.

Combining Audio and Aesthetics
The LPW40WN was designed to give you optimal high-fidelity audio reproduction with smart styling.

Stylish Wood Turntable
A stunning addition to any system, the AT-LPW40WN features an anti-resonance plinth with simulated walnut wood veneer to limit low-frequency acoustic feedback.

More Than 55 Years of Analog Expertise
We got our start in Tokyo in 1962, designing and manufacturing high-performance phono cartridges. That half-century’s worth of analog expertise goes into every turntable we produce, ensuring you get the best listening experience from your vinyl.

Features
Fully manual, belt-drive operation with two speeds: 33-1/3 and 45 RPM
Motor features a speed-sensor system to maintain accurate platter rotation speed
Fully manual operation
Adjustable dynamic anti-skate control
Professional anti-resonance, die-cast aluminum platter with rubber mat
AT-HS4 universal ½"-mount headshell and AT-VM95E Dual Moving Magnet phono cartridge with 0.3 x 0.7 mil elliptical stylus
AT-VM95E cartridge is compatible with any VM95 Series replacement stylus, offering a wide choice of options for every budget and application
Straight carbon-fiber tonearm with hydraulically damped lift control and lockable rest
Anti-resonance MDF (medium density fiberboard) plinth with walnut simulated wood veneer
Built-in switchable phono pre-amplifier for phono or line-level output
AC adapter handles AC/DC conversion outside of the chassis, reducing noise in the signal chain
Specifications
Type: 2-speed, fully manual operation
Motor: DC servo motor w/speed stability control
Drive Method: Belt-drive
Speeds: 33-1/3 RPM, 45 RPM
Wow and Flutter: < 0.15 % WRMS (33 RPM) at 3 kHz
Signal-to-Noise Ratio: > 60 dB
Output Level: Pre-amp: ""PHONO"": 4.0 mV nominal at 1 kHz, 5 cm/sec - Pre-amp ""LINE"": 200 mV nominal at 1 kHz, 5 cm/sec
Phono Pre-Amp Gain: 35 dB nominal, RIAA equalised
Power Supply Requirements: 100 to 240 V, 50/60 Hz
Dimensions: 117 x 420 x 340 (H x W x D mm)
Weight: 5.0 kg
Accessories Included
AT-HS4BK Headshell,
AT-VM95E Dual Moving Magnet Cartridge with elliptical Stylus
Detachable RCA output cable (dual RCA male to dual RCA male)
AC adapter
45 RPM adapter
Counterweight
Rubber mat

Audio Technica AT-LPW50PB Fully Manual Belt-Drive Turntable, Turntable, Audio Technica, Audio Technica Fully Manual BeltDrive Turntable, Audio Technica AT LPW50PB Fully Manual Belt Drive Turntable, Turntable, Audio Technica, Belt Drive Turntable, Audio Technica, Turntable, AT-LPW40WN, ATLPW40WN, lpw40